Why toilets leak

SolvIt Home Services is here to help you with all of your toilet leaks, problems and other plumbing issues. If you are having trouble with any part of this process, request an appointment online at SolvIt Home Services or give us a call today. No Comments. It is unfortunate that the signs of a leaky toilet usually only show themselves when the leak has gotten bad. This means that as soon as you notice that you have a leak, you should fix your toilet as possible.

The main signs of a leaking toilet may include a damp area on the floor around the bottom of the toilet, a spongy feeling in the floor at the bottom of the toilet seat, signs of dampness on the ceiling in the room underneath your toilet, or the occasional smell of sewer gas and the flooring coming up in the area around the toilet.

If your toilet is causing a wet floor, you could end up with rotted floor boards, damage to the ceiling below, and other structural damage, which could end up being disruptive and expensive to repair. There are a number of different reasons for a leaking toilet.

The most common are where bolts have become loose, the misalignment of pipes and valves, or the wax ring not sealing properly. Toilets can develop leaks both internally and externally. An external leak can cause water damage in your bathroom, not to mention some wet feet! And any type of leak can be a huge waste of water, especially if they are left unattended.

Toilet leaks should be taken care of as soon as possible before they waste too much water or damage any parts of your home.

If you are uncertain of the cause of the leak, call Cabrillo so that we can send someone to your house to inspect and fix the problem. Although some homeowners might choose to fix simple problems like a worn out flapper on their own, most of the causes of a leaky toilet are best left in the hands of a professional plumber.

Book Now. Call Us. Check the condition of the flange to make sure it isn't cracked or bent. After we scraped off the wax, we discovered that a large piece of the flange had broken off. If this happens, you can replace the entire flange no easy task , install a full replacement flange or fill in the missing piece with a repair strap. To install the curved metal strap, first loosen the two screws that secure the flange to the floor.

Insert a new closet bolt into the slot in the strap, then slide the strap under the flange step 5. Tighten the flange screws to lock the strap in place. Install the remaining closet bolt in the flange. If the bolts won't stand upright, pack a little wax from the old gasket around the base of each one. Take a new wax gasket and set it down on the closet flange, making sure it's perfectly centered step 6.

Most wax gaskets are simply a ring of solid wax, but we used Harvey's Bol-Wax No. This one has wax surrounding a core of soft urethane foam, and it easily conforms to the flange and toilet to create a superior seal. If the toilet is fitted with an old chrome-plated copper supply tube, consider replacing it with a new flexible one made of stainless steel-enmeshed polymer. It makes the installation a whole lot easier, and it will virtually last forever. We installed a in. Apply a light coating of pipe-joint compound to the fitting at each end of the supply tube, then tighten one end onto the fill-valve shank protruding from the bottom of the toilet tank step 7.

You're now ready to set the toilet back in place. Grip the bowl near the seat hinges, lift up the toilet and walk it over to the flange. Set the toilet down onto the wax gasket, using the closet bolts as guides.